Some problems encountered when cleaning stainless steel spiral air ducts?
Release date：2023/5/23 Reading times：774second
Stainless steel spiral air ducts are prone to dust accumulation after long-term use. In addition to its own installation environment, it can also conveniently nourish and cultivate bacteria. If these pollutants are not cleaned, people are prone to allergies. Of course, when we wash it, we have some simple questions. Let''s introduce some common questions.
Is it necessary to choose a good sky color for cleaning stainless steel spiral air ducts?
As long as it''s not bad weather, we might as well clean the heating pipes. If there are elderly and children in the house, we suggest that you do not clean the heating pipes when it is too cold. However, some extreme weather conditions are not suitable for cleaning heating pipelines, such as continuous moderate or heavy rain, heavy snow, and extremely cold weather below minus 10 degrees Celsius.
2. The larger the truck, the cleaner it is?
I''m not sure. There are usually two sets of equipment on special vehicles for cleaning cold and hot pipelines, one of which is an oversized dust removal equipment. The other is a super air compressor. The suction of vacuum equipment is not as good as cleaning. The cleanliness of spiral ducts depends on many factors. For example, the speed of specialization and processes, whether there are any auxiliary equipment extending to the pipeline, the location of opening, the countermeasures for pipeline obstacles, whether any links and any parts of the pipeline can be connected, the starting and ending positions of any main pipeline and the operation of the air gun, and the handling methods for some conditions. Suction is just one of them.
3. Do stainless steel spiral ducts need to be blocked and separated?
Yes. Saying goodbye to a clean pipeline is always better than not blocking it. The specific reasons are as follows:
(1) The mixing of spiral ducts and ducts will greatly reduce the suction and air flow distributed to any outlet (or branch). Although the number of return pipes is very small, due to the thick and large cross-section of the return pipes, if the supply and return pipes are wrong, the suction and airflow allocated to each branch pipe will be greatly reduced. The effectiveness of cleaning pipelines will be greatly reduced.
(2) The quality requirements for spiral air ducts vary greatly. Generally speaking, the gas supply pipeline is well sealed and the materials used are also good (usually using specialized iron plates), while the return gas pipeline is different. The raw materials for the return gas pipeline are generally wood, hollow plastic board, etc. There is usually air leakage on the return oil pipeline. During the pipeline cleaning process, natural gas leakage from the pipeline can cause a significant decrease in pipeline suction, seriously affecting the cleaning quality of the pipeline. Therefore, when the supply air duct is mixed with the return air duct, not only is the supply air duct not clean, but the supply air duct is also not clean.
Scan for more information!